Sony SNC-M1 User Guide - Page 28
Setting the Security – Security setting Menu, Security setting Menu - default ip
View all Sony SNC-M1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Setting the Security - Security setting Menu When you click Security on the Advanced mode menu, the Security setting menu appears. Use this menu to limit the computers that can access the camera. Note You can access the camera even from a computer having an IP address whose access right is set to Deny, if you enter the user name and password set for the Administrator boxes in the User setting menu. OK/Cancel See "Buttons common to every setting menu" on page 17. Administrating the Camera Security function To activate the security function, select On. If you do not wish to use the security function, select Off. Default policy Select the basic policy of the limit from Allow and Deny for the computers specified on the Network address/ Subnet 1 to Network address/Subnet 10 menus below. Network address/Subnet 1 to Network address/Subnet 10 Type the IP addresses and subnet mask values you want to allow or deny access to the camera. You can specify up to 10 IP addresses and subnet mask values. For a subnet mask, type 8 to 32. Select Allow or Deny from the drop-down list on the right for each IP address/subnet mask . Tip The subnet mask value represents the bit number from the left of the network address. For example, the subnet mask value for "255.255.255.0" is 24. If you set "192.168.0.0/24" and "Allow," you can allow access from the computers having an IP address between "192.168.0.0" and "192.168.0.255". 28 Setting the Security - Security setting Menu