Sony STR-AV500 Operating Instructions - Page 15
Sony STR-AV500 Manual
View all Sony STR-AV500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
4- [1 POWER ON/OFF buttons TV: Turns the power of the TV on and off VTR: Turns the power of the VCR 1, 2 (select one at the VCR selector) on and off. AUDIO: Turns the power of the receiver on and off E] SYSTEM POWER OFF button Turns off the power of the receiver, TV, VCR 1, 2 E TARE and VTR selector Select TAPE A: To listen to a tape in a single-deck unit or to a tape in the "A" deck of a double-deck unit Select TAPE B: To listen to a tape in the "B" deck of a double-deck unit Select VTR 1,2: If your VCR has a command mode selector, set this selector to the same position as that set on the VCR. If your VCR does not have one, set to VCR 1. If a Sony 8 mm VCR is connected, set to VCR 2. • PHONO buttons START: Starts record play. STOP: Stops record play. • CD buttons P . : Starts play ▪ Stops play N4/1"4.4: AMS (Automatic Music Sensor) PGM: Program play D.SELECT: Disc select (for a CD player equipped with disc changer) REPEAT: Repeat play SHUFFLE: Shuffle play 1] TAPE buttons .44: Leftward fast winding 4: Reverse play DO.:Forward play IP*: Rightward fast winding • : Stop 11: Pause •: Recording (while pressing 0, press -4 or lo..) O: Record muting El VTR buttons .44: Rewind up.: Play Mo.: Fast forward TVNTR: Selects the output signal from the VCR, either a TV signal or VCR programs. I: Stop II: Pause •: Recording (while pressing 0, press SURROUND button E] VOLUME control buttons K) MUTING button rli1 TUNER PRESET buttons +: Selects a higher preset number. -: Selects a lower preset number. 121 FUNCTION selectors 3 INDEX select buttons (These buttons do not operate on the STR-AV500.) [1] TV buttons VOL: Adjusts the TV sound level. CH: Selects the TV receiving channel. 3 VTR CHANNEL buttons +: Selects a higher-numbered channel. -: Selects a lower-numbered channel. Note • If you connect the CONTROL S OUT connector to the CONTROL S IN of each piece of equipment, you can control the connected equipment with this remote commander. (See page 9) • SHUFFLE and PGM modes of some CD players cannot be cleared by this remote commander. In such cases, clear the modes using the CD player itself or with the remote commander supplied with the CD player. Note on the TAPE and VTR selector ( 3-1) The tape NB selector on the commander is usable for TC- WR950. If you use another double deck with "control-S", you can operate one side of the deck. 15