Sony STR-AV500 Operating Instructions - Page 18

Receiving FM!AM Broadcasts Tuning in an AM Station Manually-Manual Tuning When you do not know the frequency of the AM station, proceed as follows: SYSTEM POWER-ON I 2 314 =.0(= OOP PO= . k p_c rl ,', *4' 1 _ O CD Select SPEAKERS A or B. 1 Press TUNER. 2 Press AM. 3 Press "+" or "-" TUNING. "+": Starts Manual Tuning from 530 kHz. "-": Starts Manual Tuning from 1610 kHz. Each time "+" or "-" is pressed, the frequency will change by 10 kHz. To change the frequency continuously, keep the button pressed. 4 Adjust the volume. To quickly tune in a roughly known frequency Example: The station between AM 700 and AM 800 kHz D REC ru Li L. U DIRECT 8 0 • rIi I xi/ 90-r Changing the AM tuning interval The AM tuning interval is preset to 10 kHz. To use the receiver where the frequency allocation system is based on a 9 kHz inteNaf, make the following adjustments. 1 Depress SYSTEM POWER and tune in any AM station. 2 Press SYSTEM POWER to turn off the unit. 3 Depress SYSTEM POWER again while pressing the "+" TUNING button. To reset the AM tuning interval, repeat the above steps. 18 Caution When the interval is changed, all preset stations which you have memorized will be erased. After changing the interval, be sure to preset the stations again.