Sony STR-D511 Operating Instructions - Page 12

Receiving FM/AM Broadcasts Tuning in a Station Directly - Direct Tuning POWER -•• ONI 0 0 : -MI O 0 000U 4 Select SPEAKERS A and/or B. 1 Press TUNER. TUNER O O 0 To correct the entered frequency Repeat steps 3 to 4. For entering AM frequencies You need not enter the last "O". (except U.K. and Australian models) However, if you have changed the AM tuning interval to 9 kHz, enter all the digits. If you enter a frequency not covered by the tuning interval The entered value is automatically rounded up or down to the closest value covered by the tuning interval. Tuning intervals for direct tuning are the followings: FM: 5O kHz interval AM: 1O kHz interval (changeable to the 9 kHz interval) 9 kHz interval (for U.K. and Australian models) (See page 4.) When an FM stereo program is noisy When the unit receives an FM stereo program, the STEREO indicator lights in the display window. If the stereo program is noisy, press FM MODE to change the mode over to MONO. This eliminates the stereo effect, but the noise will be greatly reduced. To return to the stereo mode, press FM MODE again. 2 Select FM or AM. FM AM 3 Press TUNING DIRECT. TUNING DIRECT 4 Press the appropriate numeric buttons to enter the frequency. (See examples below.) DEMI EINE EN= IN= I-. The entered frequency is displayed. Example 1: FM 102.50 MHz Example 2: AM 1350 kHz 1 O2 5O 1 35 EET5E '57 Fu 102.50 3 0 AM / ku. 12