Sony STR-DA5ES Operating Instructions - Page 64
Selecting a sound field, Programming the remote, NORMAL SURROUND, C.STUDIO EX
View all Sony STR-DA5ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Using the lists (continued) If you selected a Sony CD changer 1 Move the easy scroll key. The DISC MEMO list appears. 2 Move the easy scroll key to select a disc, then press the key to enter the selection. 3 Start playback. Note If you have changed the discs in the changer, be sure to download the CD memos from the receiver (see page 69) or play the newly inserted disc(s) before you select a disc from the changer. If you selected the tape deck Move the easy scroll key to display the information about deck A or B. Note When the remote is programmed to control a non-Sony tape deck, the following may occur: - The information about deck B is not displayed and you cannot switch between tape deck A and B. - "TAPE A/B" is displayed and tape deck A and B switch automatically each time you press the easy scroll key, etc. If you selected 2ND ROOM or 3RD ROOM Move the easy scroll key to select the source for 2nd room or 3rd room, then press the key. Selecting a sound field Do the procedure below to select a sound field from the sound field list. 1 Press SOUND FIELD. The sound field list appears. 2 Move the easy scroll key to select the sound field, then press the key to enter the selection. A display example NORMAL SURROUND C.STUDIO EX A C.STUDIO EX B p C.STUDIO EX C To turn off the sound field Move the easy scroll key to select either "2CH STEREO" or "A.F.D." in the sound field list in the display. Tip You can sort the sound field (page 71). Programming the remote You can customize the remote to match the components connected to your receiver. You can even program the remote to control nonSony components and also Sony components that the remote is normally unable to control. The procedure below uses as an example a case in which a Kenwood LD player is connected to the VIDEO 2 jacks on the receiver. Before you begin note that: - You cannot change the settings of TUNER and PHONO. - The remote can control only components that accept infrared wireless control signals. Be sure to turn on the receiver and point the remote towards the receiver when performing the following procedure. 64