Sony STR-DE945 Operating Instructions - Page 50
Adjustments Using the SET UP Button
View all Sony STR-DE945 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Adjustments Using the SET UP Button The SET UP button allows you to make the following adjustments. Selecting the 5.1CH video input This parameter lets you specify the video input to be used with the audio signals from the 5.1CH INPUT jack. The 5.1CH video input is set to DVD/LD by default. 1 Press SET UP. 2 Press the cursor buttons ( or ) to select "5.1CH V:". 3 Turn the jog dial to select the video input you desire. Adjusting the Control A1 auto function Turning on the Control A1 auto function parameter lets you turn Sony components connected via Control A1 cords (see page 13) on automatically when you press the corresponding function button. Auto function is set to ON by default. 1 Press SET UP. 2 Press the cursor buttons ( or ) to select "AUTO FUNCTION." 3 Turn the jog dial to select "ON" or "OFF." Setting up the 2 way remote (STR-DE945 only) This receiver is shipped from the factory with the 2 way remote control system set to "ON". Normally, you can use the receiver as is. However, if you want to use this receiver together with another component that is also compatible with the 2 way remote control system, be sure to perform the following operation to limit response to signals sent from the remote controls. To use with the TA-E9000ES Perform the following steps to turn OFF this unit's 2 way remote control system. Also, be sure the TA-E9000ES is turned on when using this unit. To use with other components that have the logo Turn OFF the other component's 2 way remote control system. For details, refer to the operating instructions suppled with your other components. To use with Sony CD players CDP-CX260 or CDPCX88ES Turn OFF the remote control adapter switch on the CDP-CX260 or CDP-CX88ES. For details, refer to the operating instructions suppled with the CDP-CX260 or CDP-CX88ES. Also when using several 2 way remote control system components together, be sure to place them close together in order to enable proper remote operation. 1 Press SET UP. 2 Press the cursor buttons ( or ) to select "2 WAY REMOTE". 3 Turn the jog dial to select "ON" or "OFF". Other Operations 50