Sony STR-DH720HP Operating Instructions - Page 69
System Settings menu
View all Sony STR-DH720HP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
• OFF: The receiver does not output HDMI signals when the receiver is in the standby mode. Turn on the receiver to enjoy the connected equipment's source on the TV. This setting saves power in the standby mode when compared with the "ON" setting. Notes • This function is not available when "Ctrl for HDMI" is set to "OFF". • When "AUTO" is selected, it may take a little more time for the image and sound to be output to the TV than when "ON" is selected. • When the receiver is in standby mode, "A.STANDBY" appears on the display panel if "Pass Through" is set to "AUTO" or "ON". However, "A.STANDBY" will disappear when "Pass Through" is set to "AUTO" and no signals are detected. x Audio Out Lets you set the HDMI audio signals from the playback equipment connected to the receiver via an HDMI connection. • AMP: The HDMI audio signals from the playback equipment is only output to the speakers connected to the receiver. Multi channel sound can be played back as it is. • TV+AMP: The sound is output from TV's speaker and the speakers connected to the receiver. Notes • The sound quality of the playback equipment depends on the TV's sound quality, such as the number of channels, and the sampling frequency, etc. If the TV has stereo speakers, the sound output from the receiver is also in stereo as that of the TV, even if you play back multi channel source. • When you connect the receiver to an image display equipment (projector, etc.), sound may not be output from the receiver. In this case, select "AMP". • When you select the input that you have assigned the HDMI input, sound does not output from the TV. x HDMI Assign Lets you reassign the HDMI input jacks. For details, see "HDMI input assign" (page 62). System Settings menu You can customize the settings of the receiver. x Auto Standby Lets you set the receiver switch to standby mode automatically when you do not operate the receiver or when there is no signals input to the receiver. • ON: Switches to standby mode after approximately 30 minutes. • OFF: Does not switch to standby mode. Notes • This function does not work when TUNER input is selected. • If you use the Auto standby mode and the Sleep Timer at the same time, the Sleep Timer has priority. Adjusting Settings 69GB