Sony STR-DH720HP Operating Instructions - Page 79
Image, Additional Information, No sound is output from the receiver, and TV speaker.
View all Sony STR-DH720HP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
No sound is output from the receiver and TV speaker. • Check the setting of "Audio Out" in the HDMI Settings menu (page 69). • Check that the equipment is connected correctly to the HDMI jack for that equipment. • You cannot listen to the Super Audio CD by connecting HDMI. • Depending on the playback equipment, you may need to set up the HDMI setting of the equipment. Refer to the operating instructions supplied with each equipment. • Be sure to use a High Speed HDMI cable when you view images or listen to sound, especially for the 1080p, Deep Color (Deep Colour) or 3D transmission. • Sound may not be output from the receiver while the GUI appears on the TV screen. Press GUI MODE to select "GUI OFF". • Make sure the TV is compatible with the System Audio Control function. • If the TV does not have System Audio Control function, set the "Audio Out" settings in HDMI Settings menu to - "TV+AMP" if you want to listen to the sound from the TV speaker and receiver. - "AMP" if you want to listen to the sound from the receiver. • When you connect the receiver to a video equipment (projector, etc.), sound may not be output from the receiver. In this case, select "AMP". • If you cannot listen to the sound of the equipment connected to the receiver while TV input is selected on the receiver - Be sure to change the input of the receiver to HDMI when you want to watch a program on the equipment connected via HDMI connection to the receiver. - Change the TV channel when you want to watch a TV broadcast. - Be sure to select the correct equipment or input you want when you watch a program from the equipment connected to the TV. Refer to the operating instructions of the TV on this operation. Recording cannot be carried out. • Check that the equipment is connected correctly. • Select the source equipment using the input buttons (page 41). Image No image appears on the TV. • Select the appropriate input using the input buttons. • Set your TV to the appropriate input mode. • Move your audio equipment away from the TV. • Assign the equipment video input correctly. • The input signal should be same as the input function when you are up-converting an input signal with this receiver (page 30). • When you use an HDMI-DVI conversion cable for the connection, the image may not be output correctly. • Make sure that cables are correctly and securely connected to equipment. • Depending on the playback equipment, you may need to set up the equipment. Refer to the operating instructions supplied with each equipment. Additional Information continued 79GB