Sony STR-DH720HP Operating Instructions - Page 82
Remote control, Other, The remote control does not function.
View all Sony STR-DH720HP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Erroneous display. • The data stored in the USB device may have been corrupted. • The character codes that can be displayed by this receiver are as follows: - Upper cases (A to Z) - Numbers (0 to 9) - Symbols Other characters may not be displayed correctly. The USB device is not recognized. • Turn off the receiver, then disconnect the USB device. Turn on the receiver again and reconnect the USB device. • Connect the supported USB device (page 46). • The USB device does not work properly. Refer to the USB device operating instruction on how to deal with this problem. Playback does not start. • Turn off the receiver and reconnect the USB device, then turn on the receiver. • Connect the supported USB device (page 46). • Press N to start playback. Audio file cannot be played back. • MP3 files in MP3 PRO format cannot be played back. • The audio file is a multiple track audio file. • Some AAC files may not be played back correctly. • WMA files in Windows Media Audio Lossless and Professional format cannot be played back. • USB device formatted with file systems other than FAT16 or FAT32 are unsupported.* • If you use partitioned USB device, only audio files on the first partition can be played back. • Playback is possible up to 8 levels (including "ROOT" folder). • The number of folders has exceeded 100 (including "ROOT" folder). • The number of files in a folder has exceeded 100. • Files that are encrypted or protected by passwords, etc. cannot be played back. * This unit supports FAT16 and FAT32, but some USB device may not support all of these FAT. For details, refer to the operating instruction of each USB device or contact the manufacturer. Remote control The remote control does not function. • Point the remote control at the remote control sensor on the receiver. • Remove any obstacles in the path between the remote control and the receiver. • Replace all the batteries in the remote control with new ones, if they are weak. • Make sure you select the correct input on the remote control. Other The Control for HDMI function does not work. • Check the HDMI connection (page 23). • Make sure "Ctrl for HDMI" is set to "ON" in HDMI Settings menu. • Make sure the connected equipment is compatible with the Control for HDMI function. • Check the Control for HDMI settings on the connected equipment. Refer to the operating instructions of the connected equipment. • When "Ctrl for HDMI" is set to "OFF", the "BRAVIA" Sync does not work properly, even if the equipment is connected to the HDMI IN jack. 82GB