Sony STR-DH820 Operating Instructions - Page 35
Setting the surround back, speakers, Press GUI MODE. - auto calibration
UPC - 027242809321
View all Sony STR-DH820 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Preparing the Receiver 3 Press V/v repeatedly to select "Speaker", then press or b. 4 Press V/v repeatedly to select "SP Pattern", then press or b. 5 Press V/v repeatedly to select the speaker pattern you want, then press . 6 Press RETURN/EXIT O. Setting the surround back speakers You can switch the usage of the speaker(s) connected to the SPEAKERS SURROUND BACK/FRONT HIGH/BI-AMP/FRONT B terminals in accordance with the intended use. Notes • This setting is only available if the "SP Pattern" is set to a setting without surround back and front high speakers. • Be sure to set the "SB Assign" before you perform Auto Calibration. 1 Press GUI MODE. After "GUI ON" appears on the display panel for a while, the GUI menu appears on the TV screen. Press MENU if the GUI menu does not appear on the TV screen. 2 Press V/v repeatedly to select " Settings", then press or b. The Settings menu list appears on the TV screen. 3 Press V/v repeatedly to select "Speaker", then press or b. 4 Press V/v repeatedly to select "SB Assign", then press or b. 5 Press V/v repeatedly to select the parameter you want, then press . • Speaker B: If you connect an additional front speaker system to the SPEAKERS SURROUND BACK/FRONT HIGH/ BI-AMP/FRONT B terminals, select "Speaker B". • BI-AMP: If you connect front speakers to the SPEAKERS SURROUND BACK/FRONT HIGH/BI-AMP/ FRONT B terminals using a biamplifier connection, select "BI-AMP". • OFF: If you connect surround back or front high speakers to the SPEAKERS SURROUND BACK/FRONT HIGH/ BI-AMP/FRONT B terminals, select "OFF". 6 Press RETURN/EXIT O. 35GB