Sony STR-DH820 Operating Instructions - Page 93
Specifications, AUDIO POWER - 7 2 channel 110 watt receiver
UPC - 027242809321
View all Sony STR-DH820 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
USB FAIL An over current from the (USB) port was detected. The receiver will automatically turn off after a few seconds. Check the iPhone/iPod or USB device, then unplug it and turn on the power again. For other messages, see "Message list after Auto Calibration measurement" (page 40), "iPhone/iPod message list" (page 47) and "USB message list" (page 50). Clearing the memory Reference sections To clear All memorized settings Customized sound fields See page 34 page 58 Specifications AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTAL HARMONIC DISTORTION: (USA model only) With 8 ohm loads, both channels driven, from 20 Hz - 20,000 Hz; rated 100 watts per channel minimum RMS power, with no more than 0.09% total harmonic distortion from 250 milliwatts to rated output. Amplifier section USA model1) Minimum RMS Output Power (8 ohms, 20 Hz - 20 kHz, THD 0.09%) 100 W + 100 W Stereo Mode Output Power (8 ohms, 1 kHz, THD 1%) 110 W + 110 W Surround Mode Output Power2) (8 ohms, 1 kHz, THD 10%) Canada model1) 150 W per channel Minimum RMS Output Power (8 ohms, 20 Hz - 20 kHz, THD 0.09%) 95 W + 95 W Stereo Mode Output Power (8 ohms, 1 kHz, THD 1%) 110 W + 110 W Surround Mode Output Power2) (8 ohms, 1 kHz, THD 10%) 150 W per channel Europe, Australia and Taiwan models1) Stereo Mode Output Power (8 ohms, 1 kHz, THD 1%) 100 W + 100 W Surround Mode Output Power2) (8 ohms, 1 kHz, THD 10%) 140 W per channel Additional Information continued 93GB