Sony STR-ZA810ES Operating Instructions - Page 23
Specifications, AUDIO POWER SPECIFICATIONS
View all Sony STR-ZA810ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Specifications AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTAL HARMONIC DISTORTION: With 6 ohm loads, both channels driven, from 20 Hz - 20,000 Hz; rated 90 watts per channel minimum RMS power, with no more than 0.09% total harmonic distortion from 250 milliwatts to rated output. Amplifier section1) 2) Rated Power Output at Stereo Mode (6 ohms, 20 Hz - 20 kHz, THD 0.09%): 90W + 90 W Reference Power Output at Stereo Mode (8 ohms, 20 Hz - 20 kHz, THD 0.09%): 70W + 70 W Reference Power Output (6 ohms, 1 kHz, THD 0.9%) FRONT: 110 W + 110 W CENTER: 110 W SURROUND: 110 W + 110 W SURROUND BACK: 110 W + 110 W Reference Power Output (8 ohms, 1 kHz, THD 0.9%) FRONT: 100 W + 100 W CENTER: 100 W SURROUND: 100 W + 100 W SURROUND BACK: 100 W + 100 W Reference Power Output at Surround Mode3) (6 ohms, 1 kHz, THD 0.9%): 140 W per channel 1) Measured under the following conditions: Power requirements: 120 V AC, 60 Hz 2) Depending on the sound field settings and the source, there may be no sound output. 3) Reference power output for front, center, surround, surround back speakers. Frequency response Analog 10 Hz - 100 kHz, ±3dB (When [Direct] is being used and an analog input is selected.) Input Analog Sensitivity: 500 mV/50 kilohms S/N4): 105 dB (A, 500 mV5)) Digital (Coaxial) Impedance: 75 ohms S/N: 100 dB (A, 20 kHz LPF) Digital (Optical) S/N: 100 dB (A, 20 kHz LPF) Output (Analog) ZONE 2 Voltage: 2 V/1 kilohm SUBWOOFER Voltage: 2 V/1 kilohm Equalizer Gain levels ±10 dB, 1 dB step 4) INPUT SHORT (with sound field and equalizer bypassed) 5) Weighted network, input level FM tuner section Tuning range 87.5 MHz - 108.0 MHz (100 kHz step) Antenna (aerial) FM wire antenna (aerial) Antenna (aerial) terminals 75 ohms, unbalanced Video section Inputs/Outputs Video: 1 Vp-p, 75 ohms continued 23US