Sony UPDR200 Operating Instructions - Page 11

Paper with 152-mm 6-inch width: 2UPC-R204, series and 2UPC-R206 series Printing Pack - printer f

Page 11 highlights

(When the factory is shipped, the paper adapter is attached.) 5 Load the paper roll into the printer. Be sure to load the paper roll with the arrow on the seal pointing inside the printer. Operation blue pink Press the portions indicated by the arrows until the tabs at the top lock into place. Paper with 152-mm (6-inch) width: 2UPC-R204 series and 2UPC-R206 series Printing Pack Remove the blue and pink paper adapters from the printer. Notes • To prevent the paper roll from sliding off, hold both sides of the paper core when loading it into the printer. • Do not touch the print surface (inner surface of the paper) after the paper is loaded. Fingerprints, sweat, and creases in the paper may affect print quality. • Be sure to insert the paper roll fully into the printer. 6 Remove the seal affixed to the paper roll. Note Store removed paper adapters in a safe place. Note Be sure to remove the seal completely. In addition, remove the seal slowly to avoid leaving parts of the adhesive on the paper. If any part of the seal is left inside the printer, malfunctions may occur. 11 Loading the Paper Roll and Ink Ribbon

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31

Operation
Loading the Paper Roll and Ink Ribbon
11
(When the factory is shipped, the paper adapter is
attached.)
Press the portions indicated by the arrows until the tabs
at the top lock into place.
Paper with 152-mm (6-inch) width: 2UPC-R204
series and 2UPC-R206 series Printing Pack
Remove the blue and pink paper adapters from the
printer.
Note
Store removed paper adapters in a safe place.
5
Load the paper roll into the printer.
Be sure to load the paper roll with the arrow on the
seal pointing inside the printer.
Notes
To prevent the paper roll from sliding off, hold
both sides of the paper core when loading it into
the printer.
Do not touch the print surface (inner surface of
the paper) after the paper is loaded. Fingerprints,
sweat, and creases in the paper may affect print
quality.
Be sure to insert the paper roll fully into the
printer.
6
Remove the seal affixed to the paper roll.
Note
Be sure to remove the seal completely. In addition,
remove the seal slowly to avoid leaving parts of the
adhesive on the paper. If any part of the seal is left
inside the printer, malfunctions may occur.
blue
pink