Sony UPDR200 Operating Instructions - Page 8
Connections, USB Port Connection, Installing the Printer Driver
View all Sony UPDR200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Preparation Connections After connecting a USB connecting cable (supplied) to the printer and the computer, connect the power cord. For details about the printer connection, refer to the manuals for the computer or other peripheral devices. USB Port Connection Notes • Follow the connection procedures described in the computer manual. • Make sure that the interface cable is connected securely at both ends. • The printer drive software provided with the printer is not suitable for using the printer connected to a network. • Operation of the printer is not guaranteed for connection to a USB hub. UP-DR200 Securing the USB cable and power cord To prevent disconnection of the USB cable and power cord from accidental pulling, be sure to secure the cables with the cable clamps when connecting them to the printer. To secure the USB cable Wrap the cable clamp around the USB cable, and fasten it securely as shown. To secure the power cord Wrap the cable clamp around the power cord, and fasten it securely as shown. to - AC IN connector AC power cord (not supplied) to wall outlet Computer to (USB) connector Installing the Printer Driver To install the printer driver, follow the instructions in the ReadMe.txt file and the install guide on the supplied CD-ROM. USB connecting cable (supplied) 8 Connections