Sony UPDR200 Operating Instructions - Page 22
Adjusting the Position of the Printout Image, To return to the default position
View all Sony UPDR200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Operation Adjusting the Position of the Printout Image You can adjust the position of the printout image as shown in the illustration in step 3, below, for the 2UPC-R203 series and the 2UPC-R205 series. Adjust the image position, as required, or when the blank portion appears on the edge of the printout. R2: Moves to the right by 1.2 mm from the default position. L2, L1 R1, R2 L2, L1 R1, R2 1,4 2 3 1 Press the MENU button. The printer is switched to the off-line mode. 2 Press the F and f buttons to display PRINT OFFSET. Press F and f until PRINT OFFSET appears. For the 2UPC-R203 series For the 2UPC-R205 series To return to the default position Display 0. 4 Press the MENU button after completing the adjustment. The printer returns to the on-line mode. Access the following site to get the latest information on the printer. http://www.sony.net/Products/DP-driver/ The offset amount for the current position 3 Press the G and g buttons to shift the printout image to the desired position, while looking at the printout. L1: Moves to the left by 0.6 mm from the default position. L2: Moves to the left by 1.2 mm from the default position. R1: Moves to the right by 0.6 mm from the default position. 22 Menu Operations