Sony VPL ES2 User Manual - Page 36

The INSTALL SETTING Menu The INSTALL SETTING menu is used for changing the settings of the projector. INSTALL SETTING Tilt... V Keystone: Auto Image Flip: Off Background: Blue Lamp Mode: Standard High Altitude Mode:Off Security Lock: Off Input-A Setting items Tilt... V Keystone Image Flip Background Lamp Mode High Altitude Mode Security Lock Functions Initial setting value Adjusts the position (height) of the projected picture. Corrects the trapezoidal distortion caused by the projection angle. Select "Auto" for automatic correction, or "Manual" for manual correction using the b/v/B/V key on the Remote Commander. When the bottom of the trapezoid is longer than the top : Sets a lower value. When the top of the trapezoid is longer than the bottom : Sets a higher value. Auto Flips the image on the screen horizontally and/or vertically. Off • Off: The image does not flip. • HV: Flips the image horizontally and vertically. • H: Flips the image horizontally. • V: Flips the image vertically. Select the background color of the screen when no signal is Blue input to the projector. Select "Black" or "Blue." Normally, set to "Blue." Sets the lamp brightness in the projection. • High: Illuminates the projected image brightly. • Standard: Reduces fan noise and power consumption. The brightness of the projected image will be lower compared with the "High" setting. Standard Set to "On" when the projector is used at an altitude of Off 1,500 m or higher. Turns on the projector's security lock function. Off When set to "On," turns on the security lock function, which locks the projector once a password has been set. For details, see "Security Lock" on page 24. 36 The INSTALL SETTING Menu