Sony VPL ES2 User Manual - Page 49

VD: Vertical sync input: 1-5 Vp-p high impedance, positive/ negative Y PB/CB PR/CR (VPL-ES2 only) Component phono plug sync/Y: 1 Vp-p ± 2 dB sync negative (75 ohms terminated) CB/PB: 0.7 Vp-p ± 2 dB (75 ohms terminated) CR/PR: 0.7 Vp-p ± 2 dB (75 ohms terminated) AUDIO Stereo minijack 500 mVrms, impedance more than 47 kilohms OUTPUT MONITOR OUT (VPL-CS7 only): HD D-sub 15-pin (female) R, G, B: Gain Unity: 75 ohms SYNC/HD, VD: 4 Vp-p (open), 1 Vp-p (75 ohms) Safety regulations UL60950, cUL (CSA No. 60950), FCC Class B, IC Class B, NEMKO (EN60950), CE (LVD, EMC), C-Tick General Dimensions 295 × 78 × 238 mm (11 5/8 × 3 1/8 × 9 3/8 inches) (w/h/d) (without the projection parts) Mass VPL-CS7: Approx. 2.9 kg (6 lb 6 oz) VPL-ES2: Approx. 2.8 kg (6 lb 3 oz) Power requirements AC 100 to 240 V, 50/60 Hz Power consumption VPL-CS7: Max. 250 W VPL-ES2: Max. 220 W (Standby mode: 4.6 W) Heat dissipation VPL-CS7: 853.1 BTU VPL-ES2: 750.7 BTU Operating temperature 0°C to 35°C (32°F to 95°F) Operating humidity 35% to 85% (no condensation) Storage temperature -20°C to +60°C (-4°F to 140°F) Storage humidity 10% to 90% Supplied accessories Remote Commander (1) Lithium battery CR2025 (1) HD D-sub 15 pin cable (2 m) (1) (1-791-992-21) Soft case (1) AC power cord (1) Air filter (for replacement) (1) Operating Instructions (CD-ROM) (1) Quick Reference Manual (1) Security Label (1) Design and specifications are subject to change without notice. Optional accessories Projector Lamp (for replacement) LMP-E180 (for VPL-CS7 only) LMP-E150 (for VPL-ES2 only) Signal Cable SMF-402 (HD D-sub 15-pin (male) y 3 × phono type (male)) Pin assignment INPUT A connector (HD D-sub 15-pin, female) 1 R/R-Y 9 N.C. 2 G/Y 10 GND 3 B/B-Y 11 GND 4 GND 12 DDC/SDA 5 GND 13 HD/C.Sync 6 GND (R) 14 VD 7 GND (G) 15 DDC/SCL 8 GND (B) Specifications 49 Others