Sony XAV-64BT Operating Instructions - Page 32
Installing the microphone (XAV- 64BT only), Pairing, Installing the microphone XAV, 64BT only - installation manual
View all Sony XAV-64BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Installing the microphone (XAV64BT only) To capture your voice during handsfree calling, you need to install the microphone (supplied). For details on how to connect the microphone, refer to the supplied "Installation/Connections" guide. Pairing Pairing is required only the first time you connect to a Bluetooth device (cellular phone, etc.).*1 To pair this unit to a Bluetooth device, you need to enter the same passkey*2 on this unit and on the Bluetooth device. The passkey can be either your own selected number or the number determined by the Bluetooth device. For details, refer to the manual of the Bluetooth device. *1 If you delete the device registration from this unit by initializing, you need to perform pairing again. *2 Passkey may be called "passcode," "PIN code," "PIN number," "password," etc., depending on the Bluetooth device. 1 Select the Bluetooth source. To select Bluetooth Phone, press (TOP), then touch "BT Phone" in the top menu. To select Bluetooth Audio, touch "Source List," then "BT Audio." 2 Touch "BT Menu." In the case of Bluetooth Audio, touch "Play Menu," then "BT Menu." The Bluetooth setting menu appears. Back ATT Top BT Menu Signal OFF / ON Pairing Auto Answer OFF 1/2 Ringtone Default / Cellular EC/NC Mode Mode 1 / Mode 2 4 Operate the Bluetooth device to search for this unit. A device list appears on the display of the device. This unit is displayed as "Sony Automotive." DR-BT30Q Sony Automotive XXXXXXX 5 If passkey* input is required on the display of the device, input "0000." XXXX Input passkey. "0000" This unit and the Bluetooth device memorize each other's information, and when pairing is made, this unit is ready for connection to the device. 6 Operate the Bluetooth device to connect to this unit. "Bluetooth device connected." appears and connection is complete. " " or " " appears when the connection is made. Notes • While connecting to a Bluetooth device, this unit cannot be detected from another device. To enable detection, enter the pairing mode and search for this unit from another device. • It may take time to pair or connect. • Depending on the device, the confirmation display of the connection appears before inputting the passkey. • The time limit for inputting the passkey differs depending on the device. • This unit cannot be connected to a device that supports only HSP (Head Set Profile). 3 Touch "Pairing." Pairing starts.* * If the Bluetooth signal of this unit is off, it activates automatically when pairing starts. 32