Sony XAV-64BT Operating Instructions - Page 33
Connecting, last-connected from this unit
View all Sony XAV-64BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Connecting When the ignition is turned to on with the Bluetooth signal activated, this unit searches for the last-connected Bluetooth device, and connection is made automatically if possible. This chapter explains how to connect manually to registered Bluetooth devices. Before starting, be sure to activate the Bluetooth signal both on this unit (page 37) and the other Bluetooth device. Connecting a cellular phone 1 Make sure the Bluetooth signal of this unit and the cellular phone is turned on. 2 Operate the cellular phone to connect to this unit. " " flashes while the connection is being made, then stays lit while connected. Connecting to the cellular phone last-connected from this unit 1 Make sure the Bluetooth signal of this unit and the cellular phone is turned on. 2 Press (TOP), then touch "BT Phone" in the top menu. " " flashes while the connection is being made, then stays lit while connected. Note Some cellular phones require permission to access their phonebook data during handsfree connection to this unit. Obtain permission via the cellular phone. Tip With Bluetooth signal on: when the ignition is switched to on, this unit reconnects automatically to the lastconnected cellular phone. But automatic connection also depends on the cellular phone's specification. If this unit does not reconnect automatically, connect manually. Connecting an audio device 1 Make sure the Bluetooth signal of this unit and the audio device is turned on. 2 Operate the audio device to connect to this unit. " " flashes while the connection is being made, then stays lit while connected. Connecting to the audio device lastconnected from this unit 1 Make sure the Bluetooth signal of this unit and the audio device is turned on. 2 Touch "Source List," then "BT Audio." 3 Touch "Connect." " " flashes while the connection is being made, then stays lit while connected. Note If connection is made during audio streaming, noise may occur over playback sound. Tip You can connect a cellular phone for audio streaming if it supports A2DP (Advanced Audio Distribution Profile). To disconnect 1 Press (TOP) then touch "BT Phone," or touch "Source list" then "BT Audio." 2 Touch "BT Menu." 3 Touch "Signal," then "Yes" on the confirmation display to turn off the signal. To delete all registrations 1 Press (TOP) then touch "BT Phone," or touch "Source list" then "BT Audio." 2 Touch "BT Menu." 3 Touch "Initialize," then "Yes" on the confirmation display to start initializing. 33