Sony XAV-64BT Operating Instructions - Page 37
Audio streaming, Listening to a Bluetooth device via this unit, Bluetooth settings, this unit - remote control
View all Sony XAV-64BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Audio streaming Listening to a Bluetooth device via this unit If the other device supports A2DP (Advanced Audio Distribution Profile), you can listen to the playback sound via this unit. 1 Connect this unit and the Bluetooth device (page 33). 2 Reduce the volume on this unit. 3 Touch "Source List," then "BT Audio." The Bluetooth Audio display appears. 4 Operate the other Bluetooth device to start playback. 5 Adjust the volume on this unit. Operating a Bluetooth device with this unit If the other device supports AVRCP (Audio Video Remote Control Profile), you can control playback via this unit. Operations can be performed in the same way as disc playback (page 17), except for the following: Do this To Touch "Play Menu" c "BT Menu" open the Bluetooth setting menu (page 37). Touch -/+ in the reduce the volume level "Level" box differences between this unit and the other Bluetooth device. The level is adjustable in single steps, between -8 and +18. Touch "Connect" connect to the lastconnected device from this unit. Notes • The available operation differs depending on the Bluetooth device. Perform unavailable operations on the Bluetooth device. • Depending on the Bluetooth device, it may be necessary to touch u twice to start/pause the playback. • During audio streaming, some indications such as track name, etc., may not appear on this unit. Bluetooth settings The Bluetooth settings can be configured in "BT Menu." 1 Select the Bluetooth source. To select Bluetooth Phone, press (TOP), then touch "BT Phone" in the top menu. To select Bluetooth Audio, touch "Source List," then "BT Audio." 2 Touch "BT Menu." In the case of Bluetooth Audio, touch "Play Menu," then "BT Menu." The Bluetooth setting menu appears. 3 Touch the desired item in the list and configure the setting. The items in the Bluetooth setting menu are as follows: "Signal"*1 Activates the Bluetooth signal: "ON," "OFF." "Pairing"*1 Turns the pairing mode on/off, and memorizes the information between this unit and the Bluetooth device. "Auto Answer"*1 Answers an incoming call automatically. - "Short": to answer automatically after 3 seconds. - "Long": to answer automatically after 10 seconds. - "OFF": to not answer automatically. "Ringtone"*1*2 Uses the ringtone of this unit or the connected cellular phone: "Default," "Cellular." "EC/NC Mode" (Echo Canceller/Noise Canceller Mode) Reduces echo and noise during a call. For normal use, set to "Mode 1." If the outgoing sound quality is unsatisfactory, set to "Mode 2." "MIC Gain" (page 36) Adjust the microphone volume for the other party: "Low," "Middle," "High." "Initialize"*1 Initializes all Bluetooth related settings. Touch "Yes" to confirm. *1 Cannot be configured during a handsfree call. *2 Depending on the cellular phone, this unit's ringtone may be output even if set to "Cellular." Note For details on the setting of other Bluetooth devices, refer to their respective manuals. 37