Sony XDS1000 User Manual (XDS-1000 Operation Manual for Firmware Version 1.1) - Page 97
Troubleshooting, Alarms
View all Sony XDS1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
Troubleshooting Alarms An alarm (warning message) appears in the status display area when an operation is attempted which is inappropriate for the settings on this unit or the state of a media. Both the alarm message and the action to take to resolve the problem appear on the video monitor screen or on a PC monitor connected to the MONITOR connector. Example alarm in status display area Appendix Example alarm in video monitor screen When an alarm is displayed, remove the alarm cause by following the action to take. If the alarm display does not disappear, contact your Sony service or sales representative. When the unit is powered on Alarm message in status Alarm message in video monitor screen Description/action display area ILL. SETUP! INVALID SETTINGS SELECTED IN SETUP MENU. SET ITEMS IN THE SETUP MENU TO THE APPROPRIATE VALUES. CONTACT SERVICE IF THIS ALARM APPEARS AGAIN AFTER ABOVE PROCEDURE. Reset the settings in the setup menu (see page 74). If the same message appears after you reset the settings, contact your Sony service or sales representative. Exchg batt! BATTERY NEEDS REPLACING. PLEASE CONTACT SERVICE. The battery of the internal clock is exhausted. Contact your Sony service or sales representative. Update Err! RUN SOFTWARE UPDATE PROGRAM. The software update is not properly performed. Update the software version again. If the same message appears after you update the software version, contact your Sony service or sales representative. ADJ. Mode! - This appears when the unit is in adjustment mode. Contact your Sony service representative. PSU detect OPTIONAL REDUNDANT POWER SUPPLY UNIT HAS BEEN DETECTED.PLEASE CHECK AND SET MAINTENANCE MENU ITEM M22. An optional power supply unit has been detected. Set the maintenance menu item M22: OPTION SETTING. DVB-ASI detect OPTIONAL DVB-ASI I/O UNIT HAS BEEN An optional DVB-ASI I/O unit has been detected. DETECTED.PLEASE CHECK AND SET Set the maintenance menu item M22: OPTION MAINTENANCE MENU ITEM M22. SETTING. 97 Troubleshooting