Sony ZRD-2 Operating Instructions - Page 13

Adjusting the Picture Quality Adjust the contrast, brightness, and other picture quality settings. The settings configured on the primary controller will be applied to all the other display controllers, including the sub controllers. Sub controllers cannot be configured individually. Caution If the a primary controller is not configured via Display Control Software or the primary controller is not already turned on at the time the [Picture Settings] screen is displayed, picture quality adjustment cannot be performed. In addition, the picture quality settings will not be applied to the sub controllers if they are not turned on. 1 Select [Picture Settings] in the [Array] menu on the main screen of Display Control Software. 2 Configure each setting. The values currently configured on the primary controller are displayed on the [Picture Settings] screen. The settings are reflected in the picture immediately after they are configured. Before version 1.20.0 Version 1.20.0 or later [Picture Mode] (version 1.20.0 or later only): Select from [Mode1] to [Mode10] to display the setting values for [Contrast] to [Color Temperature Settings]. If necessary, change the values for [Contrast] to [Color Temperature Settings]. The setting values are identical for each mode under factory default settings. [Contrast]: Use the slider and buttons to adjust the contrast. Setting range: 0 to 100 Default value: 60 [Brightness]: Use the slider and buttons to adjust the brightness. Setting range: 0 to 100 Default value: 50 [Gamma]: Select the gamma correction value. Default value: 2.2 Caution • This product is not a medical device. The device cannot be used for medical examinations, even when [DICOM SIM] is selected. • The [Gamma] settings will be disabled if [HDR] is set to a setting other than [Off]. [HDR] (version 1.20.0 or later only): Select the playback mode for HDR (high dynamic range) content. • [SMPTE ST 2084] • [S-Log3] • [ITU-R BT.2100 (HLG)] (version 1.22.0 or later): Display the HLG (Hybrid Log Gamma) image specified by recommendation ITU-R BT.2100. It takes priority over the value set in [Gamma]. • [S-Log3 (Live)] (version 1.22.0 or later): Display the HDR image with system gamma added to the S-Log 3 input signals. It takes priority over the value set in [Gamma]. • [Off] [Color Space]: Select the color space. • [Native]: Display the picture with the display unit's color space of the three primary color chromaticity points. • [sRGB]: Display the picture using the sRGB color space standard. • [AdobeRGB]: Display the picture using the Adobe RGB color space standard. • [DCI] (before version 1.20.0 only): Display the picture using the DCI color space standard. • [DCI_P3] (version 1.20.0 or later only): Display the picture using the DCI color space standard. • [BT.2020]: Display the picture using the BT.2020 color space standard. • [Custom6] to [Custom10] (version 1.20.0 or later only): Display pictures using a custom color space. 13