Sony ZRD-2 Operating Instructions - Page 3

Please Read This First Manual Structure This product includes the following manuals to be used according to the situation. Before Using This Unit (ZRD-1/ZRD-2, ZRCT-100/ ZRCT-200) This includes important safety precautions, specifications, etc. Installation Manual This includes information on installation, initial setup, equipment adjustment procedures, etc. Refer to this manual when changing equipment settings or performing readjustments after installation as well. Operating Instructions (this document) This includes information on video input selection, picture quality adjustment, parts identification, etc. Refer to this manual when performing general operations. Service Manual This is intended for use by service personnel and includes information on diagnosing malfunctions and instructions on repair. Licenses Refer to the Software License Agreement. Burn-in Permanent burn-in may occur if a still image is displayed for a prolonged period of time. Playing a video with moving images may reduce the severity of burn-in once it occurs, but it will not remove the burn-in completely. Defective pixels The panel fitted to this unit is manufactured with high precision technology, giving a functioning pixel ratio of at least 99.99%. Thus a very small proportion of pixels may be "stuck," either always off (black), always on (red, green, or blue), or flashing. In addition, such "stuck" pixels may appear spontaneously over a long period of use due to the physical characteristics of the organic light-emitting diodes. Such occurrences do not indicate a malfunction. General Precautions • Avoid getting the product wet. In the event of accidental contact with liquids, do not turn on the power, and contact a service representative. • If an error or malfunction occurs or if foreign matter enters the interior of the product, turn off the power and discontinue use, and contact a service representative. • Do not subject the front panel of the display units to damage or shocks. • Request cleaning and maintenance periodically from a service representative. Condensation If the unit is suddenly taken from a cold to a warm location, or if ambient temperature suddenly rises, moisture may form on the outer surface of the unit and/or inside of the unit. This is known as condensation. If condensation occurs, turn off the unit and wait until the condensation clears before operating the unit. Operating the unit while condensation is present may damage the unit. Security SONY WILL NOT BE LIABLE FOR DAMAGES OF ANY KIND RESULTING FROM A FAILURE TO IMPLEMENT PROPER SECURITY MEASURES ON TRANSMISSION DEVICES, UNAVOIDABLE DATA LEAKS RESULTING FROM TRANSMISSION SPECIFICATIONS, OR SECURITY PROBLEMS OF ANY KIND. Depending on the operating environment, unauthorized third parties on the network may be able to access the unit. When connecting the unit to the network, be sure to confirm that the network is protected securely. 3