Sony ZRD-2 Operating Instructions - Page 16

Using Network Features, Displaying the Control Window of the, Display controller with a Web, Browser

Page 16 highlights

Using Network Features Connection to the network allows you to operate the following features: • Changing the password. • Setting the ADCP protocol. • Setting the support network monitoring protocol (SNMP). Notes • When connecting the display controller with the network, consult with the network administrator. The network must be secured. • When using the display controller connected with the network, access the control window via a Web browser. It is recommended to change the password regularly. • When the setting on the Web browser is completed, close the Web browser to log out. • The menu displays used for the explanation below may be different depending on the model you are using. • Supported Web browsers are Internet Explorer and Safari. • The menu displays only English. • If the browser of your computer is set to [Use a proxy server] when you have access to the display controller from your computer, click the check mark to set accessing without using a proxy server. • IPv6 is not supported. Displaying the Control Window of the Display controller with a Web Browser 1 Connect the LAN cable. 2 Start a web browser on the computer, enter the following in the address field, then press the Enter key on your computer. http://xxx.xxx.xxx.xxx (xxx.xxx.xxx.xxx: IP address for the display controller) When you access the Web page for the first time, input "admin" as the user name and "cledis" as the password in the authentication dialog. When you log in for the first time, the window that prompts you to change the password is displayed. Follow the instructions on the screen to change the password. The name of the administrator is preset to "admin." Entry area for [Administrator] The password can be changed in the Password page. When you change the password, input a new password. The password of the administrator and user should be 8 to 16 characters that includes both alphabet and numeric characters. Alphabet is case-sensitive. The default password "cledis" cannot be set as a new password. Note If you forget your password, consult with qualified Sony personnel. At that time, we may contact you with a special password to reset your password. (However, since the password is for reconfiguration, the available range is limited.) 16

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25

16
Using Network Features
Connection to the network allows you to operate the
following features:
Changing the password.
Setting the ADCP protocol.
Setting the support network monitoring protocol
(SNMP).
Notes
When connecting the display controller with the
network, consult with the network administrator. The
network must be secured.
When using the display controller connected with the
network, access the control window via a Web browser.
It is recommended to change the password regularly.
When the setting on the Web browser is completed, close
the Web browser to log out.
The menu displays used for the explanation below may
be different depending on the model you are using.
Supported Web browsers are Internet Explorer and
Safari.
The menu displays only English.
If the browser of your computer is set to [Use a proxy
server] when you have access to the display controller
from your computer, click the check mark to set
accessing without using a proxy server.
IPv6 is not supported.
Displaying the Control Window of the
Display controller with a Web
Browser
1
Connect the LAN cable.
2
Start a web browser on the computer, enter the
following in the address field, then press the Enter key
on your computer.
(xxx.xxx.xxx.xxx: IP address for the display
controller)
When you access the Web page for the first time, input
“admin” as the user name and “cledis” as the password in
the authentication dialog.
When you log in for the first time, the window that prompts
you to change the password is displayed. Follow the
instructions on the screen to change the password.
The name of the administrator is preset to “admin.”
The password can be changed in the Password page.
When you change the password, input a new password.
The password of the administrator and user should be 8 to
16 characters that includes both alphabet and numeric
characters. Alphabet is case-sensitive.
The default password “cledis” cannot be set as a new
password.
Note
If you forget your password, consult with qualified Sony
personnel. At that time, we may contact you with a special
password to reset your password. (However, since the
password is for reconfiguration, the available range is
limited.)
Entry area for [Administrator]