Sony ZRD-2 Operating Instructions - Page 4
Overview, System Configuration Diagram
View all Sony ZRD-2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Overview You can connect the display units based on the installation location and intended use, convert the video content signals that are input to the display controller based on the array size, and output the signals onto the display units. 4K2K video can be controlled via a single display controller. Control of the display units is performed from a computer on which Display Control Software is installed. Daisy-chain connections can be configured between display units using a power cord (supplied with the ZRD-2 only) and a network cable. (For details on the number of display units that can be connected, refer to the Installation Manual.) Caution Use the Category 6a cable supplied with the ZRD-2 for the network cable or a commercially available Category 7 cable. Do not use a commercially available Category 6a cable. Notes • Display of 4K2K video requires 72 display units. • Each display controller is equipped with 12 ports, and each port is capable of controlling up to 6 display units. System Configuration Diagram Configuration example of the entire system VPN router Video content transmitters Matrix switcher Production monitors Video processor • DisplayPort connector • DVI connector (ZRCT-100 only) • HDMI connector (ZRCT-200 only) Control (LAN) Control (LAN) Hub Controller PC (Display Control Software installed) Array (display units) Display controller Display controller 4