Stihl 026 Instruction Manual - Page 35

Move Master Control lever

Get Stihl 026 PDF manuals and user guides View all Stihl 026 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 35 highlights

• Pull the hand guard back toward the front handle: the chain brake is now disengaged your saw is ready for operation. Observe safety precautions. •• Always check operation of chain lubrication before starting work. • Move Master Control lever to "Stop" Always disengage the chain brake before opening the throttle. Running the engine at higher revs with the chain brake engaged (saw chain at a standstill) will quickly damage the engine and chain drive (clutch, chain brake). 143BA012 KN 143BA012 KN As soon as the engine runs: • Blip the throttle trigger to disengage it from starting throttle position Master Control lever will move to normal operating position - • engine settles down to idling speed. Disengage chain brake: Pull hand guard toward front handle • as shown in illustration Open throttle slightly - • warm up engine for short period. Change over to winter operation if necessary see section "Winter Operation". If you did not move the Master Control lever to "Warm Start" quickly enough after the engine began to fire, the combustion chamber has flooded. • Turn knob or lever above rear • handle 90° counterclockwise. Lift off the carburetor box cover vertically. 133BA010 KN 133BA009 KN

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
•
Pull the hand guard back toward
the front handle:
the chain brake is now
disengaged -
°
your saw is ready for operation.
•
Observe safety precautions.
•
Always check operation of chain
lubrication before starting work.
6KXW´GRZQ´HQJLQH¶
•
Move Master Control lever to
"Stop"
E
Always disengage the chain brake
before opening the throttle. Running the
engine at higher revs with the chain
brake engaged (saw chain at a
standstill) will quickly damage the engine
and chain drive (clutch, chain brake).
$W´YHU\´ORZ´RXWVLGH´WHPSHUDWXUHV¶
$OORZ´HQJLQH´WR´ZDUP´XS
As soon as the engine runs:
•
Blip the throttle trigger
to disengage it from starting throttle
position -
Master Control lever will move
to normal operating position -
engine settles down to idling speed.
•
Disengage chain brake:
Pull hand guard toward front handle
as shown in illustration -
•
Open throttle slightly -
warm up engine for short period.
•
Change over to winter operation
if necessary -
see section "Winter Operation".
,I´HQJLQH´GRHVQÃW´VWDUW¶
If you did not move the Master Control
lever to "Warm Start"
Q
quickly enough after the engine began
to fire, the combustion chamber has
flooded.
•
Turn knob or lever above rear
handle 90° counterclockwise.
•
Lift off the carburetor box cover
vertically.
143BA012 KN
143BA012 KN
133BA009 KN
133BA010 KN
»µº
··