Stihl 026 Instruction Manual - Page 50
Shflilfdwlrqv
![]() |
View all Stihl 026 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
STIHL single cylinder two-stroke engine Displacement: 48.7 cm3 (2.97 cu.in) Bore: 44 mm (1.73 in) Stroke: 32 mm (1.26 in) Idle speed: 2.800 r.p.m. Type: Electronic magneto ignition (breakerless) Spark plug (suppressed): Bosch WSR 6 F or NGK BPMR 7 A Electrode gap 0.5 mm (0.02 in) Spark plug thread: M 14x1.25; 9.5 mm (0.37 in) long Carburetor: All position diaphragm carburetor with integral fuel pump Air filter: Prefilter and bisectional box filter Fuel capacity: 0.46 l (0.97 U.S. pt) Fuel mixture: See chapter "Fuel" Chain lubrication: Fully automatic, speedcontrolled plunger type oil pump. Additional manual oil flow control Oil tank capacity: Recommended cutting attachments for compliance with § 5.12 of ANSI Standard B 175.1-1991 (see page 12 of this Manual): STIHL reduced kickback bar (with green label): for 0.325" pitch and 3/8" pitch: Rollomatic with sprocket nose 40, 45 or 50 cm (16, 18 or 20 in) STIHL low kickback chain* (with green label): 8.25 mm (0.325") Rapid-Micro 2 (26 RM 2), 9.32 mm (3/8") Rapid-Micro 2 (33/36 RM 2) Chain sprocket: 7-tooth for 0.325" pitch, 7-tooth for 3/8" pitch Other cutting attachments available for this powerhead are: STIHL yellow-labeled bar: for 0.325" pitch and 3/8" pitch: Rollomatic "S" with sprocket nose 40, 45 or 50 cm (16, 18 or 20 in) Duromatic with stellite tipped nose 40, 45 or 50 cm (16, 18 or 20 in) 0.29 l (0.61 US pt) (without bar and chain) 026; 026 W 4.7 kg (10.4 lb) 4.9 kg (10.8 lb) STIHL yellow-labeled chains: for 0.325" pitch: Rapid-Micro (26 RM) and Rapid-Super (26 RS) for 3/8" pitch: Rapid-Micro (33/36 RM) and Rapid-Super (33/36 RS) Since new bar/chain combinations may be developed after publication of this Manual, ask your STIHL dealer for the latest STIHL recommendations. In order to comply with the kickback performance requirements of § 5.12 of ANSI Standard B 175.1-1991, do not use replacement saw chain unless it has been designated as meeting the ANSI § 5.12 requirements on this specific powerhead, or has been designated as "low kickback" saw chain* in accordance with the ANSI B 175.11991 standard. *See definition of "low kickback chain" on page 11 of this Manual.
![](/manual_guide/products/stihl-026-instruction-manual-a5dceee/50.png)