Stihl 026 Instruction Manual - Page 51
For recommended STIHL reduced, kickback cutting attachments, see Specifications, of
![]() |
View all Stihl 026 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Please enter your saw model, machine number as well as the part numbers of the guide bar, saw chain and chain sprocket in the spaces provided on the right This will make re-ordering simpler. The guide bar, saw chain and chain sprocket are subject to normal wear and tear. The part numbers of the standard bar, chain and sprocket are printed on the right for your convenience. When purchasing these parts, always quote the saw model, the part numbers and names of the parts. Model Machine number Guide bar part number Chain part number Sprocket part number For recommended STIHL reduced kickback cutting attachments see section "Specifications" of this Owner's Manual. Original STIHL parts can be identified by the STIHL part number, the logo STIHL and the STIHL parts symbol The symbol may appear alone on small parts. * depending on market For periods of about 3 months or longer: • Drain and clean the fuel tank in a • well ventilated area. Run engine until carburetor is dry this helps prevent the carburetor • diaphragms sticking together. Remove the saw chain and guide bar, clean them and protect • with corrosion inhibiting oil. Thoroughly clean the machine pay special attention to the cylinder fins and air filter. • If you use a biological chain lubricant (e.g. STIHL Bioplus), fill the chain oil tank. • Store the machine in a dry and high or locked location - out of the reach of children and other unauthorized persons.
![](/manual_guide/products/stihl-026-instruction-manual-a5dceee/51.png)