Stihl HT 101 Instruction Manual - Page 26
Checking Chain Lubrication, Adjusting the Telescoping, Shaft, Fitting the Harness
![]() |
View all Stihl HT 101 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
390BA048 KN 390BA049 KN 390BA040 KN English Checking Chain Lubrication Adjusting the Telescoping Shaft HT 101, HT 131 only WARNING Always shut off the engine and fit the chain guard The saw chain must always throw off a small amount of oil. NOTICE Never operate your saw without chain lubrication. If the chain runs dry, the whole cutting attachment will be irretrievably damaged within a very short time. Always check chain lubrication and the oil level in the tank before starting work. Every new chain has to be broken in for about 2 to 3 minutes. After breaking in the chain, check chain tension and adjust if necessary - see "Checking Chain Tension". N Loosen the screw. N Adjust shaft to the required length. N Tighten down the screw firmly. Fitting the Harness The type and style of the harness depend on the market. Shoulder strap 1 2 N Put on the shoulder strap (1). N Adjust the length of the strap. N With the power tool attached, the carabiner (2) must be at about the same height as your right hip. 24 HT 100, HT 101, HT 130, HT 131
![](/manual_guide/products/stihl-ht-101-instruction-manual-d53d49b/26.png)