Stihl MS 210 Instruction Manual - Page 26
Mounting the Bar and Chain, side chain tensioner
View all Stihl MS 210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
English Chain scabbard Mounting the Bar and Chain (side chain tensioner) Removing the chain sprocket cover Disengaging the chain brake. 001BA186 KN 001BA244 KN 143BA034 KN Your saw comes standard with a chain scabbard that matches the cutting attachment. If you use guide bars of different lengths on the saw, the length of the chain scabbard must be matched to the guide bar to help reduce the risk of injury. It should cover the full length of the guide bar. The length of the matching guide bars is marked on the side of the chain scabbard. N Unscrew the nuts and take off the chain sprocket cover. 1 2 N Pull the hand guarad towards the front handle until there is an audible click - the chain brake is disengaged. Fitting the chain 143BA003 KN 001BA185 KN N Turn the screw (1) counterclockwise until the tensioner slide (2) butts against the left end of the housing slot. WARNING Wear work gloves to protect your hands from the sharp cutters. N Fit the chain - start at the bar nose. 24 MS 210, MS 210 C, MS 230, MS 230 C, MS 250, MS 250 C