Stihl MS 210 Instruction Manual - Page 65
Observe notes on ANSI B 175.1
View all Stihl MS 210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Cutting Attachments for MS 210, MS 210 C, MS 230, MS 230 C Recommended cutting attachments complying with Section 5.11 of ANSI B 175.1-2000. Observe notes on ANSI B 175.1-2000 and definition of "low kickback chain" in chapter on "Safety Precautions and Working Techniques". Rollomatic E 3/8" guide bars Reduced kickback STIHL guide bar (with green label) Cutting lengths: 12, 14, 16 cm (30, 35, 40 cm) Pitch: 3/8" P (9.32 mm) Groove width: 0.050 in (1.3 mm) Nose sprocket: 9-tooth 3/8" P chain Low kickback STIHL saw chains (with green label) Picco Micro 3 (63 PM3) Type 3636 Picco Duro (63 PD3) Type 3612 Pitch: 3/8" P (9.32 mm) Drive link gauge: 0.050 in (1.3 mm) Chain sprocket 6-tooth for 3/8" (spur sprocket) Cutting Attachments for MS 250, MS 250 C Recommended cutting attachments complying with Section 5.11 of ANSI B 175.1-2000. Observe notes on ANSI B 175.1-2000 and definition of "low kickback chain" in chapter on "Safety Precautions and Working Techniques". Rollomatic E 3/8" guide bars Reduced kickback STIHL guide bar (with green label) Cutting lengths: 12, 14, 16, 18 in (30, 35, 40, 45 cm) Pitch: 3/8" P (9.32 mm) Groove width: 0.050 in (1.3 mm) Nose sprocket: 9-tooth Rollomatic E .325" guide bars Reduced kickback STIHL guide bar (with green label) Cutting lengths: 16, 18 in (40, 45 cm) Pitch: .325" (8.25 mm) Groove width: 0.063 in (1.6 mm) Nose sprocket: 11-tooth 3/8" P chain Low kickback STIHL saw chains (with green label) Picco Micro 3 (63 PM3) Type 3636 Picco Duro (63 PD3) Type 3612 Pitch: 3/8" P (9.32 mm) Drive link gauge: 0.050 in (1.3 mm) .325" saw chain Low kickback STIHL saw chains (with green label) Rapid Micro 3 (26 RM3) Type 3634 Pitch: .325" (8.25 mm) Drive link gauge: 0.063 in (1.6 mm) English Chain sprockets 6-tooth for 3/8" (spur sprocket) 7-tooth for 0.325" (spur sprocket) Cutting Attachments for MS 210, MS 210 C, MS 230, MS 230 C, MS 250, MS 250 C To ensure compliance with the kickback properties required in Section 5.11 of ANSI B 175.1-2000, only use replacement chains that, when used with this specific powerhead, comply with Section 5.11 of the ANSI standard or are classed as "low kickback" chains according to ANSI B 175.1-2000. Please ask your STIHL dealer for the latest recommendations on new bar/chain combinations developed after publication of this instruction manual. MS 210, MS 210 C, MS 230, MS 230 C, MS 250, MS 250 C 63