Stihl MS 210 Instruction Manual - Page 42
time. Set Master Control lever
![]() |
View all Stihl MS 210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
English Versions with decompression valve All models 0 1 When the engine begins to fire: N Set the Master Control lever to the starting throttle position (n ). N Hold and start your saw as described. As soon as the engine runs 2 3 0 5 135BA015 KN 208BA000 KN 208BA001 KN N Press in the button to open the decompression valve. The decompression valve closes as soon as the engine fires. N For this reason you must press in the button before each starting attempt. N Push the hand guard (1) forward - the chain is locked. N Press down trigger lockout (2) and pull the throttle trigger at the same time. Set Master Control lever (3) to: Choke closed (l) - If the engine is cold (also use this position if the engine stopped when you opened the throttle after starting) Starting throttle position (n) - If the engine is warm, i.e. if it has been running for about one minute. N Hold and start your saw as described. 3 4 N Press down the trigger lockout and the blip the throttle trigger (4) - the Master Control lever (3) moves to the run position F and the engine settles down to idling speed. NOTICE As the chain brake is still engaged, the engine must be returned to idling speed immediately - or the engine housing and chain brake might otherwise be damaged. 40 MS 210, MS 210 C, MS 230, MS 230 C, MS 250, MS 250 C
![](/manual_guide/products/stihl-ms-210-instruction-manual-2375e6b/42.png)