Stihl MS 210 Instruction Manual - Page 51
Replacing the Starter Rope, Models with ElastoStart, Models without ElastoStart and models,
View all Stihl MS 210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Replacing the Starter Rope Models with ElastoStart English Models without ElastoStart and models with Easy2Start 208BA014 KN 10 11 12 N Pry the cap (10) out of the grip. N Remove the remaining rope from the rotor and starter grip. 108BA015 KN 135BA032 LÄ a N Thread the new rope through the starter grip and tie a simple overhand knot. Dimension "a" should be about 0.16 in (4 mm) to 0.23 in (7 mm). N Pull the knot back into the grip. N Refit the cap in the grip. 135BA036 KN Thread the end of the rope N through the top of the guide bushing (11) and rope rotor (12) and secure it with a simple overhand knot. N Go to "Installing the Rope Rotor". N Remove the remaining rope from the rotor and starter grip. N Thread the new starter rope through the rotor and secure it with a simple overhand knot. N Thread the other end of the rope through the rope guide bushing (from inside) and the underside of the starter grip and secure it with one of the special knots shown - do not wind the rope onto the rotor. MS 210, MS 210 C, MS 230, MS 230 C, MS 250, MS 250 C 49