Stihl MS 311 Product Instruction Manual - Page 25
Cutting Attachment, Mounting the Bar and, Chain
View all Stihl MS 311 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Cutting Attachment STIHL is the only manufacturer in the industry to produce its own chain saws, guide bars, saw chains and chain sprockets. A cutting attachment consists of the saw chain, guide bar and chain sprocket. The cutting attachment that comes standard is designed to exactly match the chain saw. Mounting the Bar and Chain Removing the chain sprocket cover 1 2 N Unscrew the nuts and take off the chain sprocket cover. 143BA034 KN English Disengaging the chain brake. N Pull the hand guarad towards the front handle until there is an audible click - the chain brake is disengaged. Fitting the chain 001BA186 KN 001BA191 KN a 3 t = a : 2 - The pitch (t) of the saw chain (1), chain sprocket and the nose sprocket of the Rollomatic guide bar must match. - The drive link gauge (2) of the saw chain (1) must match the groove width of the guide bar (3). If non-matching components are used, the cutting attachment may be damaged beyond repair after a short period of operation. 1 2 N Turn the screw (1) counterclockwise until the tensioner slide (2) butts against the left end of the housing slot. 001BA185 KN Wear work gloves to protect your hands from the sharp cutters. N Fit the chain - start at the bar nose. 143BA003 KN MS 311, MS 391 23