Stihl MS 311 Product Instruction Manual - Page 28
Opening the cap, Fueling, Closing the cap, Change the fuel pickup body
![]() |
View all Stihl MS 311 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
English Opening the cap Closing the cap Change the fuel pickup body 001BA162 KN 001BA160 KN N Raise the grip until it is upright. N Fit the cap - grip upright - marks must line up. N Turn the cap clockwise as far as stop (approx. a quarter turn). 165BA003 KN 001BA161 KN N Turn the cap counterclockwise (approx. a quarter turn). N Remove the filler cap. Fueling Take care not to spill fuel while fueling and do not overfill the tank. N Fold the grip flush with the top of the cap. If the grip does not lie completely flush with the cap and the detent on the grip does not engage the recess in the filler neck, the cap is not properly seated and tightened and you must repeat the above steps. 001BA163 KN Change the fuel pickup body every year. N Open the filler cap and drain the fuel tank. N Use a hook to pull the fuel pickup body out of the tank and take it off the hose. Do not kink the fuel hose - do not use any sharp or pointed tools. N Push the new pickup body into the hose. N Place the pickup body in the tank and close the filler cap. 26 MS 311, MS 391
![](/manual_guide/products/stihl-ms-311-product-instruction-manual-3987f18/28.png)