Stihl MS 311 Product Instruction Manual - Page 42
Replacing the Starter Rope, and Rewind Spring
View all Stihl MS 311 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
4903BA002 KN English Install spark plug 1 N Screw in the spark plug and press on the spark plug boot N Refit the shroud and tighten the screws 000BA036 TR Warning! To reduce the risk of fire and burn injury, use only spark plugs authorized by STIHL. Always press spark plug boot (2) snugly onto spark plug terminal (1) of the proper size. (Note: If terminal has detachable SAE adapter nut, it must be attached.) A loose connection between spark plug boot and ignition wire connector in the boot may create arcing that could ignite combustible fumes and cause a fire. 4903BA008 KN Replacing the Starter Rope and Rewind Spring Remove shroud N Move the Master Control lever to the stop position 0 N Push the hand guard forwards - the saw chain is blocked 1 2 1 1 N Loosen screws (1) N Remove the shroud (2) Removing the fan housing 1 1 1 1 N Remove screws (1) N Push hand guard upward N Pull the bottom of the fan housing away from the crankcase and remove downwards 4903BA005 KN 40 MS 311, MS 391