Symphonic SC3809 Owner's Manual - Page 26

TO CHECK THE STA.RT/END TIME 3 Auto Return w€ll begin 1) Press POWER button so that the REC indicator goes off. 2) Press MENU button on the remote control. 3) Confirm "TIMER PROGRAMMING" is pointed. 4) Press F.FWD/ button. The details of programs ap- pear on the TV screen. 5) Press MENU button. The TV screen returns to the TV mode. HINTS: • Make sure the channel you want to record is properly set in advance. When all the timer recordings are completed, the TVNCR will rewind to the beginning of the recorded program(s). NOTES: • If you press POWER button during rewinding a tape, the Auto Return will be stopped. • The Counter Memory function does not operate in this mode. , 42:0.6.66,9999. 4 Watch the recorded program catiestame.000.000,01,0 Press PLAY button. • It is not necessary to press RECORD button for timer recording. EJN TIMER • Recording begins automatically at the set of the Start time. • If you are recording using a Timer mode, you may not operate the unit manually. • The erase-prevention tab on the cassette must be in place (or you must put tape over the hole). • If the erasure protection tab is removed, the cassette will be ejected when the POWER button is pressed to off. • If the tape runs out before the end time, the TVNCR will switch to the Stop mode immediately, and the tape will be ejected. The Sleep Timer function make the TVNCR turn off without using the POWER button after a desired time period. Press SLEEP button on the remote control repeatedly until your desired sleep time appears. Each additional push will increase the time by 30 minutes. It is set up to 120 minutes. SLEEP no 'mire I push DISPLAY 0 MINUTE SLEEP TIME 0 minute AUTO RETURN 2 pushes 30 MINUTE 30 minutes With this feature, after finished timer recording, the beginning of the recorded program(s) can be searched automatically. 3 pushes 4 pushes 5 pushes 60 MINUTE 90 MINUTE 120 MINUTE 60 minutes 90 minutes 120 minutes 1 Select "USER'S SET UP" 6 pushes 0 MINUTE 0 minute Press MENU button. Press PLAY/A or STOP/V button repeatedly to point to "USER'S SET UP". -MENU- 'MIER PROGRAMMING PICTURE CONTROL SETTING CLOCK CHANNEL SET UP ► USER'S SET UP CAPTION ICIPTCOAD TIME SEARCH TO CANCEL THE SLEEP TIMER Press SLEEP button repeatedly until "SLEEP 0 MINUTE" appears. And press F.FWD/II button. 2 Set "AUTO RETURN" to [ON] Press PLAY/A or STOP/V button repeatedly to point to "AUTO RETURN". - USER'S SET UP - Press F.FWD/1/- or REW/'4 button repeatedly until [ON] appears. GAME MODE 'OFF RENTAL REPEAT PLAY 1- AUTO RETURN APP CAI - 26 - EN 8B26