Symphonic SC724FDF Owner's Manual - Page 14
Connecting To A Dolby Digital Decoder For Dvd
![]() |
View all Symphonic SC724FDF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
CONNECTING TO A DOLBY DIGITAL DECODER (for DVD) If using this unit to play a DVD disc in a 5.1 channel Dolby Digital surround format, the unit outputs a DOLBY DIGITAL Data stream from its AUDIO OUT COAXIAL jack. By hooking the unit up to a Dolby Digital decoder, you can enjoy a more convincing, realistic ambience with powerful and high-quality surround sound as enjoyed in movie theaters. Use audio coaxial digital cables (commercially available) for the audio connections. Center speaker Front speaker (left) Front speaker ANT. (right) AUDIO OUT COAXIAL (OUT) Dolby Digital decoder Surround speaker (left) To Coaxial digital Audio input jack Surround speaker (right) Subwoofer (IN) To AUDIO OUT COAXIAL jack (Only DVD AUDIO OUT) Audio coaxial digital cable (commercially available) [Fig. 7] NOTES: • Be sure to turn off the power to all components in the system before connecting another component. • Refer to the Owner's Manuals for the components to be connected to the unit. • If connected to a Dolby Digital decoder, set "DOLBY DIGITAL" to "BITSTREAM" for audio output in the setup mode. (Refer to page 44.) • Unless connected to a Dolby Digital decoder, set "DOLBY DIGITAL" to "PCM" for audio output in the setup mode. Playing a unit using incorrect settings may generate noise distortion and may also damage the speakers. (Refer to page 44.) Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are trademarks of Dolby Laboratories. - 14 - EN
![](/manual_guide/products/symphonic-sc724fdf-owners-manual-4ad4c32/14.png)