Symphonic SC724FDF Owner's Manual - Page 28

INDEX SEARCH TV/VCR This feature provides a method of indexing the starting point so that it can be easily returned to in either fast forward or rewind mode. • The index mark will be made automatically when [RECORD] is hit. It will also be marked at the starting point of Timer recording and OTR. • The index mark will not be recorded if [PAUSE F] is hit and released during recording. • The time gap between making the index marks on the tape should be greater than 1 minute for SP recording, 2 minutes for LP recording and 3 minutes for SLP recording. • In some cases, the index mark at the beginning of video tape cannot be detected. Example: You are watching program number 4 and want to fast forward to program number 7. You must skip three programs. CURRENT PLAYBACK PROGRAM Beginning of the tape End of the tape Pro.1 Pro.2 Pro.3 Pro.4 Pro.5 Pro.6 Pro.7 4321123 INDEX MARK 1 Select "INDEX SEARCH" Hit [SETUP]. Press [K / L] to point to "INDEX SEARCH", then hit [ENTER]. - TV/VCR SETUP - TIMER PROGRAMMING SETTING CLOCK CHANNEL SET UP USER'S SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] ZERO RETURN TIME SEARCH B INDEX SEARCH 2 Enter your desired number Press [K / L] until the number of programs that you want to skip appears. (Example: "03" for 3 programs) INDEX SEARCH 0 3 • The Index Search mode will be canceled if the pro- cedures are not activated in 30 seconds. 3 Begin Index Search Press [s / B]. The unit begins rewinding or fast forwarding to the beginning of desired program. NOTE: • Every time an index signal is skipped, the number in the program indicator decreases by one. 4 After Index Search When the preset program is reached, the unit will start playback automatically. • A video cassette must be inserted in the unit for this function to work. • The number of Index Searches can be set up to 20. • This function will not operate in the recording mode. • When you want to cancel the Index Search while in progress, hit [STOP C]. SPECIAL FEATURES REAL TIME TAPE COUNTER AUTO REWIND-EJECT TV/VCR This shows the elapsed recording or playback time in hours, minutes, and seconds. (The displayed time will not change on a blank tape or blank portions on the tape.) The "-" indication will appear when the tape has rewound further than "0:00:00" on the tape counter. TV/VCR • When the end of a tape is reached during record- ing, playback, or fast-forward, the tape will automatically rewind to the beginning. After rewinding finishes, the unit will eject the tape and turn itself off. • This function is operative when Repeat Play is set to the [OFF] position. • The tape will not auto-rewind during timer record- ing or One Touch Recording. - 28 - EN