Symphonic SC724FDF Owner's Manual - Page 18

CLOCK SET UP (AUTO / MANUAL) TV/VCR The unit clock must be set correctly so that VCR timer recording is possible. It is suggested that the clock be set manually when first setting up the unit, then set to [ON] the auto clock setting which will periodically correct the setting if necessary. NOTE: • If you cannot receive a station with time signals, auto clock setting cannot be performed. Use manual setting only. 5 Select the year Press [K / L] until your desired year appears. (Example: "2005") Then hit [B]. 6 Select the hour Press [K / L] until your desired hour appears. (Example: "5", "PM") Then hit [B]. MANUAL CLOCK SETTING Make sure ... • The unit must be turned on. In the example below, the clock is to be set to: DATE May 6th, 2005 SETTING TIME 5:40PM 7 Select the minute Press [K / L] until the desired minute appears. (Example: "40") - MANUAL CLOCK SET - MONTH DAY 0 5 / 0 6 FRI YEAR 2 0 0 5 HOUR MINUTE -- : -- -- - MANUAL CLOCK SET - MONTH DAY 0 5 / 0 6 FRI YEAR 2 0 0 5 HOUR MINUTE 0 5 : - - PM - MANUAL CLOCK SET - MONTH DAY 0 5 / 0 6 FRI YEAR 2 0 0 5 HOUR MINUTE 0 5 : 4 0 PM 1 Select "SETTING CLOCK" Hit [SETUP]. Press [K / L] to point to "SETTING CLOCK", then hit [ENTER]. - TV/VCR SETUP - TIMER PROGRAMMING B SETTING CLOCK CHANNEL SET UP USER'S SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] ZERO RETURN TIME SEARCH INDEX SEARCH 2 Select "MANUAL CLOCK SET" Press [K / L] to point to "MANUAL CLOCK SET", then hit [ENTER]. - SETTING CLOCK - AUTO CLOCK [ON] AUTO CLOCK CH SEARCH AUTO CLOCK CH [ 02 ] B MANUAL CLOCK SET D.S.T. [OFF] • If there is no local PBS station in your area or on your cable system, select "AUTO CLOCK" and hit [ENTER] to turn [OFF] this function before this step. 3 Select the month Press [K / L] until your desired month appears. (Example: May → "05") Then hit [B]. (Or hit [s] to go back one step.) - MANUAL CLOCK SET - MONTH DAY YEAR 05 HOUR MINUTE -- : -- -- 8 Start the clock Hit [SETUP]. 5:40 PM Although seconds are not displayed, they begin counting from 00 when you hit [SETUP]. Use this feature to synchronize the clock with the correct time. NOTE: • When unplugging the AC cord or if there is a power failure for more than 3 seconds, you may have to reset the clock. TO CHANGE CLOCK SETTING If you want to change the clock, 1)Follow steps 1 to 2. 2)Select the item you want to change using [B] . 3)Enter correct numbers using [K / L]. 4)Hit [SETUP] to start the clock. 4 Select the day Press [K / L] until your desired day appears. (Example: 6th → "06") Then hit [B]. - MANUAL CLOCK SET - MONTH DAY YEAR 05 / 06 --- ---- HOUR MINUTE -- : -- -- - 18 - EN