Symphonic SC724FDF Owner's Manual - Page 29

RECORDING Make sure ... • The unit must be turned on. • Insert a cassette tape with its erase-prevention tab in place. (If necessary, rewind or fast forward the tape to the point at which you want to begin recording.) NOTES: • This unit will ONLY record and view the same channel. • This unit cannot record the contents from the built-in DVD. NORMAL RECORDING TV/VCR You can ONLY watch the same TV program that is being recorded. 1 Select the channel to be recorded Press the Number buttons or [CH. K / L]. CH 10 NOTE: • If the unit is connected to a cable box or satellite box, the unit must be on CH3 or CH4, then the channel to be recorded must be selected on the cable box or satellite box. SKIPPING UNWANTED SCENES DURING RECORDING TV/VCR Hit [PAUSE F] to temporarily stop PAUSE recording. Press [PAUSE F] or [RECORD] to resume recording. NOTES: SP • After 5 minutes, the unit will automatically switch to the recording mode to pre- vent tape damage. • If Closed Caption mode is on, the On-Screen Display will appear for 5 seconds, then disappear. 2 Select the tape speed Hit [SPEED] to select the desired tape speed (SP/ SLP). SP 3 Begin recording REC Hit [RECORD]. SP 4 Stop recording Hit [STOP C]. - 29 - EN