Symphonic SC724FDF Owner's Manual - Page 25
Playback
![]() |
View all Symphonic SC724FDF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
PLAYBACK NORMAL PLAYBACK Make sure ... • The unit must be turned on. TV/VCR 1 Insert a prerecorded tape If the erase-prevention tab has been removed, the unit will start playback automatically. 2 To begin playback PLAY B Hit [PLAY O]. 3 To stop playback STOP Hit [STOP C]. NOTES: • Even in the DVD mode, you can start the VCR playback if you hit [B PLAY] (of the TV/VCR side). • VCR playback will stop and the mode will change to the DVD mode by pressing [SELECT], [B PLAY] (DVD side) or [A OPEN/CLOSE]. TRACKING ADJUSTMENT TV/VCR • Tracking adjustment will be set automatically (Digital Tracking function) when you start playback. • Noise lines (black and white streaks) may appear on the playback picture when playing pre-recorded tapes or tapes recorded on other VCR. If this occurs, press [CH. K / L] until the streaks disappear. • You can reduce the noise lines by pressing [CH. K / L] in the slow mode too. Tracking adjustment in the slow mode will not be set automatically. • To return to the Digital Auto Tracking function, stop the tape once and start playback. SLOW MOTION TV/VCR Hit [PAUSE F], then hit [D] to start the playback in slow motion. The unit mutes the sound during slow motion. Hit [PLAY O] to return to normal playback. NOTE: • If it is left in the slow mode for more than 5 min- utes, the unit will automatically go into the stop mode. STILL PICTURE TV/VCR You can view a still picture on the TV screen during playback (the still mode). Hit [PAUSE F] during playback. Only tapes recorded in the SLP mode will show the least amount of lines. Hit [PLAY O] to return to playback. NOTES: • You can advance the picture one frame at a time by hitting [PAUSE F] during the still mode. • If it is left in the pause mode for more than 5 min- utes, the unit will automatically switch to the stop mode. VERTICAL HOLD CONTROL TV/VCR In the pause/still mode only, when the picture begins to vibrate vertically, stabilize the picture by pressing [CH. K / L]. NOTE: • If there are video noise lines on the screen, refer to TRACKING ADJUSTMENT on this page. - 25 - EN
![](/manual_guide/products/symphonic-sc724fdf-owners-manual-4ad4c32/25.png)