Symphonic TR-WF13 Owners Manual - Page 11

CABLE KITH CONVERTER/ DESCRAMBLER BOX OR £4 TELITE BOX. If your cable service supplies you with a converter box or if you use a satellite system, you can use the basic connection shown here. By using this connection you can also record scrambled channels. However, channel selection must be made with the converter box or satellite box. This means that channels cannot be changed using the TV/VCR Remote Control. Unattended timer recording is limited to one channel at a time. Satellite Box or CUT Cable Box (not supplied) IN From Cable Sys₹em or Satellite Dish 75-ohm NIP Coaxial Cable (not supplied) INSTALLING THE BATTERIES ) Open the battery compartment cover by pressing the cover on the remote unit in the direction of the arrow. 2) Insert 2 "AA" penlight batteries into the battery compartment in the direction indicated by the polarity (+1-) markings. 3) Replace the cover. 0 00* EXTERNAL INPUT MODE When using an external input signal (another VCR or video camera), connect the player's audio/video output cables to the AUDIO IN/ p ANT. VIDEO TN jacks of your AUX TV/VCR. Then press the O CHANNEL A or V button [Fig.7] until "AUX" appears on the screen. TO RECORD A. SCRAMBLED/UNSCRAMBLED CHANNEL . Set the TVNCR channel selector to the output channel of the Cable Converter Box or Satellite Box. (Ex. CH3) 2. Select the channel to record from your Cable Converter Box or Satellite Box.