Symphonic TR-WF13 Owners Manual - Page 14

CLOCK SET UP (AUTO / MANUAL) Set the clock accurately for proper automatic timer recording. If the Public Broadcasting Station (PBS) is available in your area, follow "AUTO CLOCK SETTING". If it is not, follow "MANUAL CLOCK SETTING". 2 Sei 'AUTO CLOC.;K. ' to Press the F.FWD/10- or REW/-4 button repeatedly until ION] appears. SEMINGOLtY, • I. AUTO CLOP, NEIC,A. AENO CLOS. Go NOV' OST Stec tne chorine; nurnbe' t trio PBS station UTO CLOCK SETTING You can have the TV/VCR set the clock automatically by using the Public Broadcasting Station (PBS) channel in your area. Once you have set the clock by using the following procedure, the TVNCR will automatically monitor the correct time and date being broadcast by the PBS station in your area, using a new service called Extended Data Service (XDS). Make sure ... • Use the remote control for this procedure. Press the PLAY/A or STOP/7 button to point to "AUTO CLOCK CH". 1 - SEiE.NG AUTOUCCE OCE: . 5Cr i, . AUTO CLOG, C...NOTON Then press the F.FWD/10- or ( %%NUN.SAGO:SE' REW/-4 button until the channel OS. ?O''''. number for your local PBS station appears. If you do not know the PBS channel number, leave it set to [AUTO] which is located before [2]. The TV/VCR will search automatically all available channels for the local PBS station. and will select that channel. • TVNCR power must be turned on. • Confirm that the antenna connections are correct. • The cable converter box must be turned on if your TVNCR is connected directly to it. (See NOTES:) 4 E).it the Atito Clock Se-tin Press the MENU button to return to TV mode. Turn oft thts• NOTES: Press the POWER button to turn off the TVNCR for searching the local PBS station. The power must • Auto clock setting only needs to be set once. But it remain off during this search. can be done again if the clock's time has become incorrect for some reason. Ifyou enter the channel number manually. • If the TVNCR is connected directly to a cable • it may take a few minutes for this search to be completed. converter box or satellite box, the local PBS station must be selected on the cable box itself. and the , Ifyou choose [AUTO], TVNCR must be set to the output channel of the • the TVNCR must search until the PBS channel is cable converter box or satellite box found. It must scan each channel for a couple of sec- (usually channel 3 or 4), to be able to set up or correct onds to determine if that channel is transmitting the the clock automatically. XDS signal. This search could take up to 10 If you do not know what your local PBS station is, then follow "Manual Clock Settings" on page 15. minutes if the local PBS station is on a high numbered channel in your area or on your cable system. The TVNCR cannot control the channels of the cable converter box or satellite box. • if the time, that is automatically set by this selected PBS station is incorrect. it may not be your local PBS station, but one from a different time zone. Or there . .I Select "SETTING rl Press the MENU button. - t • is a case that no channel is broadcasting the XDS signal in your area, as shown by no time being set even after a 10 minutes search. In these cases, you Press the PLAY/A. or STOP/V button to point to "SETTING CLOCK". Then, press the F.FWD/10- button. lkep *GAAANANG ET,7, UNE OCENNCA ▪ SE,, NS CNAMIL. SE, ti• USE,* SET LANGUAGE ,ENGUS.E CA o. SEAS NFO.44. rEAE SEAkfTE: must manually enter the correct local PBS station. or set the clock manually and turn off the Auto Clock Setting feature. - 14 - EN 71:03