TASCAM Celesonic US-20x20 Reference Manual - Page 10
Preparation
View all TASCAM Celesonic US-20x20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
4 - Preparation Attaching the rack mount angles Before mounting this unit in a rack, you must remove the frame pieces and install the included rack mount angles. Follow these procedures to attach the rack mount angles. (Prepare a Phillips screwdriver in advance.) 1. Use the hex key included with this product to remove the four screws from each side frame as shown in the illustration below. In order to prevent the cord from becoming disconnected during use, wrap it around the cord holder when connecting it. 2. Remove the frames from both ends of the unit. 3. Use the Phillips screwdriver that you prepared to attach the included rack mount angles using the included rack mount angle installation screws. NOTE Reverse these procedures to reinstall the frames that were originally attached to the unit. Connecting the power Use the included AC adapter (GPE248-120200-Z) to connect a power supply to the unit as shown below. Power outlet GPE248-120200-Z (included) DC plug CAUTION Always use the AC adapter (GPE248-120200-Z) that was shipped with the unit. Using a different AC adapter could cause malfunction, overheating, fire or other problems. NOTE The AC adapter for the unit includes two types of outlet plugs. Attach the type of plug that matches the power outlet that you are using. (See "Changing the outlet plug" on page 10.) Changing the outlet plug 3 2 $ 5 % 1 4 1 Move the latch on the AC adapter in the direction of the arrow. 2 Pull off the outlet plug. 3 Replace it with the other outlet plug (A or B). 4 Move the latch on the AC adapter in the direction of the arrow again. 5 Attach the outlet plug to the AC adapter. After changing the outlet plug, confirm that it is not loose or crooked and that everything is normal before plugging it into an outlet CAUTION Do not use the adapter if there is anything abnormal about the plug after changing it. Use when the plug is abnormal could cause fire or electric shock. Contact the retailer where you purchased the unit or a TEAC service center (on the back cover) to request repair. 10 TASCAM US-20x20