TASCAM Celesonic US-20x20 Reference Manual - Page 11

Connections

Get TASCAM Celesonic US-20x20 PDF manuals and user guides View all TASCAM Celesonic US-20x20 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 11 highlights

5 - Connections Examples of connections with other equipment Guitar Bass Guitar Drums Headphones Digital recorder Sound module Computer Drum machine Powered speakers or amplifier and speakers Example using a US-20x20 CAUTION • Before making connections, turn this unit and all equipment to be connected off (standby). • The phantom power switches set four input channels at a time. Do not set phantom power to +48V when connecting an unbalanced dynamic mic. • Do not connect or disconnect mics while phantom power is set to +48V. Doing so could cause a loud noise and might damage this unit and connected equipment. • Set the LINE OUT 1-2 and PHONES 1/2 knobs to their minimum values before changing a phantom power switch setting. Failure to do so could cause sudden loud noises from monitoring equipment, and this could damage equipment or harm hearing. • Supplying phantom power to some ribbon mics will break them. If you are unsure, do not supply phantom power to a ribbon mic. TASCAM US-20x20 11

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
TASCAM
US-20x20
11
5 – Connections
Examples of connections with other equipment
Bass Guitar
Guitar
Drums
Headphones
Computer
Powered speakers or
amplifier and speakers
Drum machine
Sound module
Digital recorder
Example using a US-20x20
CAUTION
•
Before making connections, turn this unit and all equipment to be connected off (standby).
•
The phantom power switches set four input channels at a time. Do not set phantom power to
+48V
when connecting an unbalanced
dynamic mic.
•
Do not connect or disconnect mics while phantom power is set to
+48V
. Doing so could cause a loud noise and might damage this
unit and connected equipment.
•
Set the
LINE OUT 1–2
and
PHONES 1/2
knobs to their minimum values before changing a phantom power switch setting. Failure to
do so could cause sudden loud noises from monitoring equipment, and this could damage equipment or harm hearing.
•
Supplying phantom power to some ribbon mics will break them. If you are unsure, do not supply phantom power to a ribbon mic.