TASCAM Celesonic US-20x20 Reference Manual - Page 37
Computer system requirements
View all TASCAM Celesonic US-20x20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
11 - Specifications Control input/output ratings 88 USB Connector: USB 3.0 B type Transfer rate: USB 3.0 Super Speed (5 Gbps) 88 MIDI IN connector Connector: 5-pin DIN Format: standard MIDI 88 MIDI OUT connector Connector: 5-pin DIN Format: standard MIDI 88 WORD IN connector Connector: BNC Input voltage: 2.0 Vp-p - 5.0 Vp-p Input impedance: 75 Ω ±10% Permitted frequency deviation during external synchronization: ±100 ppm Terminal on/off switch 88 WORD OUT connector Connector: BNC Input voltage: 2.0 Vp-p (into 75 Ω) Output impedance: 75 Ω ±10% Sampling frequencies: 44.1, 48, 88.2, 96, 176.4 and 192 kHz OUT/THRU switch Audio performance 88 Mic amp EIN (equivalent input noise) −125 dBu or lower 88 Frequency response Input w LINE OUT (BALANCED) At 44.1/48 kHz and 20 Hz - 20 kHz: ±0.5 dB (JEITA) At 176.4/192 kHz and 20 Hz - 80 kHz: ±5 dB (JEITA) 88 S/N ratio 104 dB or higher (MIC/LINE IN w LINE OUT, gain knob at MIN, JEITA) 88 Distortion 0.005% or less (MIC/LINE IN w LINE OUT, 1kHz sine wave, at nominal input level and maximum output level) 88 Crosstalk 100 dB or more (MIC/LINE IN w LINE OUT, 1 kHz) Computer system requirements Check the TEAC Global Site (http://teac-global.com/) for the latest information about supported operating systems. Windows 88 Supported operating systems Windows 10 32-bit Windows 10 64-bit Windows 8.1 32-bit Windows 8.1 64-bit Windows 7 32-bit SP1 or later Windows 7 64-bit SP1 or later 88 Computer hardware requirements Windows computer with a USB 3.0 or USB 2.0 port 88 CPU/processor speed 2 GHz or faster dual core processor (x86) 88 Memory 2 GB or more 88 Display resolution 1280×800 or greater CAUTION • The included USB cable (USB 2.0 or USB 3.0) and the USB specification that can be used depends on the computer and OS you are using. Supported operating systems Windows 10 32-bit Windows 10 64-bit Windows 8.1 32-bit Windows 8.1 64-bit Windows 7 32-bit SP1 or later Windows 7 64-bit SP1 or later USB standard USB 2.0 USB 3.0 ü ü* ü ü* ü - ü - ü - ü - USB cable connected USB 3.0 cable* USB 2.0 cable USB 2.0 cable USB 2.0 cable * Connect with the included USB 3.0 cable to use the USB 3.0 standard. • Operation of this unit was confirmed using standard computers that meet the above requirements. This does not guarantee operation with all computers that meet the above requirements. Even computers that meet the same system requirements might have processing capabilities that differ according to their settings and other operating conditions TASCAM US-20x20 37