TASCAM DM-24 Application-Specific Documents DM-24 with Alesis HD-24 - Page 1
TASCAM DM-24 Manual
![]() |
View all TASCAM DM-24 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
DM-24 with Alesis HD-24 setup • You must have DM-24 OS 2.03 and HD-24 OS 1.06 or higher for this to work. You should always use the most current version of the OS available for both machines. You will gain new features and receive bug fixes. • You must have two IF-AD/DM cards installed in the DM-24. • The I/O from SLOT 1 should be connected to HD-24 tracks 1-8. • The I/O from SLOT 2 should be connected to HD-24 tracks 9-16. • The I/O from the internal ADAT connection should be connected to HD-24 tracks • 17-24. • You must also have a 75ohm BNC word clock cable. Connect this to the word clock output on the DM-24 and the word clock input on the HD-24. • Change the clock source on the HD-24 to WORD. • On the DM-24 go to the DIGITAL-CLOCK page. • Choose INT 44.1k. • The RECORDING 1-16 and OVERDUB 17-24 factory snapshots must be modified and stored for use with the HD-24. • Recall the RECORDING 1-16 snapshot. • Go to the ch 17-32 section of the I/O page.
![](/manual_guide/products/tascam-dm24-applicationspecific-documents-dm24-alesis-hd24-429f499/1.png)