TEAC CD-RW901SL CD-RW901SL Owner's Manual - Page 21

IMPORTANT4 S−APFlEaTyYbaINckSToRpUeCraTItOioNnSs EXT SYNC playback In this mode, the unit will play back in synchronization with the clock selected as digital input source (OPTICAL, COAXIAL, AES/EBU). When stopped, use the EXT SYNC option in the PLAY sub-menu (see "Operation basics" on page 16) to set the external synch playback mode on. Select the input source for sync playback. NOTE When the EXT SYNC is on, and when the unit detects a signal other than 44.1kHz, synchronization with the clock of the selected digital input source may fail, and EXTCLKErr! will be displayed. The audio playback may also be affected. If the selected digital input source is at 48kHz, using the 48k Fs adjustment function allows the audio to be played back at the correct pitch. Timer playback By using an external timer, you can set the CD-RW901SL to play the loaded disc automatically when the unit is turned on by the timer. 1. First, plug the power cord of the CD-RW901SL into the power outlet of the timer. 2. Load a disc into the unit. 3. Switch the TIMER switch on PLAY to enable timer function on for the desired deck. When Timer playback has been turned on, the timer icon lights up in the display. When stopped, and when in playback or playback ready mode, press the SYNC REC key to turn the 48k Fs adjustment function on or off. When the function is on, 48k Fs Adj will be displayed. The setting remains until the EXT SYNC function is set to off, and even the power is turned off. NOTE When the 48k Fs Adjustment is on, and when the unit detects a signal other than 48kHz, synchronization with the clock of the selected digital input source may fail. The audio playback may also be affected. When the 48k Fs adjustment is on, the Pitch control and Key control functions cannot be used. The EXT SYNC playback function does not operate with MP3 discs. 4. Set the timer to the desired time. Consult the timer' s operation manual for details. At the set time, the power to the CD-RW901SL will be turned on, and playback will automatically begin. Timer indicator NOTE The indicator flashes when a disc is not loaded into the unit. Repeat playback 1. Press the REPEAT key to turn on the repeat mode. In this mode, all the tracks on the disc are played continuously. The display shows Repeat ON and the indicator lights up REPEAT. During playback, if the repeat mode is turned on, playback continues as before, and when the last track finishes, playback resumes from the first track. If the repeat mode is turned on when the deck is stopped, press the PLAY key to begin operation. 2. Press the REPEAT key again to turn off repeat mode. Repeat OFF appears then the REPEAT indicator turns off. NOTE Combining the repeat mode with the program, Single-track playback and Random playback functions will enable Program repeat, Single-track repeat and Random repeat operations, respectively. Settings for the repeat playback mode remain after power is turned off, except the specified A-B section (see "A to B repeat playback" on page 22). 21 TASCAM CD-RW901SL