TEAC CD-RW901SL CD-RW901SL Owner's Manual - Page 23

Incremental playback, International Standard Recording Code ISRC, Call function, End of disc/track

Get TEAC CD-RW901SL PDF manuals and user guides View all TEAC CD-RW901SL manuals
Add to My Manuals
Save this manual to your list of manuals

Page 23 highlights

IMPORTANT4 S−APFlEaTyYbaINckSToRpUeCraTItOioNnSs Auto Cue function Using the auto cue function, you can select a cue point where sound begins (not where a track begins) within a track. Turn the auto cue function on and use the A_CUE LEVEL sub-menu option (see "Operation basics" on page 16) to set the sound detection level (-24, -30, -36, -42, -48, -54, -60, -66 and -72 dB). Then, select a track and press the PLAY key. The unit enters playback ready mode. When the PLAY key is pressed again, playback begins at exactly the cue point. While the auto function is on, the A.CUE indicator lights up on the display. Auto Ready function This function allows the playing back a single track, and the automatic cuing of the next track ready for playback. Use the A_READY sub-menu option to turn the function on or off. When on, the A.READY indicator lights up on the display. Combined with Auto Cue function, the unit enters playback ready mode at the point where the sound detection level is set in A_CUE LEVEL sub-menu option of the next track. Incremental playback In this function, when the unit is in playback mode, and when the PLAY key is pressed, the unit starts playback from the beginning of the next track. Use the Menu option or the INC PLAY key on the remote control to set this mode on. The TRACK indicator will blink during playback or playback ready mode. When the STOP key is pressed, the unit will enter playback ready mode at the start of the next track. Call function Call function allows the unit's playback position to be returned to the point at which playback last started from ready mode. If there is no "call point", an error message No Call PT!!will be displayed. NOTE This function cannot be used with program, random and MP3 playback mode. End of disc/track message (EOM) When nearing the end of a track or disc, the EOM indicator will light up on the display. The number of seconds (1 to 99) before the track/disc end that the indicator is displayed can be set beforehand. To set the message display time, use the EOM TRK or EOM DISC options on the PLAY sub-menu (see "Operation basics" on page 16). NOTE This function cannot be used with MP3 playback mode. International Standard Recording Code (ISRC) When in playback or playback ready mode, if the FAINALIZE key is pressed, the display shows "ISRC" code on the screen. If there is no "ISRC" code on the disc or the code has not been recorded on the disc, Incomplete!will appears on the display. 23 TASCAM CD-RW901SL

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
IMPORTANT SAFETY INSTRUCTIONS
TASCAM
CD-RW901SL
±²
4 − Playback operations
TASCAM
CD-RW901SL
±²
In this function, when the unit is in playback mode, and
when the
PLAY
key is pressed, the unit starts playback
from the beginning of the next track.
Use the Menu option or the
INC PLAY
key on the remote
control to set this mode on. The
TRACK
indicator will blink
during playback or playback ready mode.
When the
STOP
key is pressed, the unit will enter play-
back ready mode at the start of the next track.
Incremental playback
When in playback or playback ready mode, if the
FAINALIZE
key is pressed, the display shows “ISRC” code
on the screen. If there is no “ISRC” code on the disc or the
code has not been recorded on the disc,
Incomplete!
will
appears on the display.
International Standard Recording Code (ISRC)
Call function allows the unit’s playback position to be
returned to the point at which playback last started from
ready mode. If there is no “call point”, an error message
No Call PT!!
will be displayed.
NOTE
This function cannot be used with program, random
and MP3 playback mode.
Call function
When nearing the end of a track or disc, the
EOM
indicator
will light up on the display.
The number of seconds (1 to 99) before the track/disc end
that the indicator is displayed can be set beforehand.
To set the message display time, use the EOM TRK
or EOM DISC options on the PLAY sub-menu (see
“Operation basics” on page 16).
NOTE
This function cannot be used with MP3 playback mode.
End of disc/track message (EOM)
Using the auto cue function, you can select a cue point
where sound begins (not where a track begins) within a
track.
Turn the auto cue function on and use the A_CUE LEVEL
sub-menu option (see “Operation basics” on page 16) to set
the sound detection level (-24, -30, -36, -42, -48, -54, -60,
-66 and -72 dB).
Then, select a track and press the
PLAY
key. The unit
enters playback ready mode.
When the
PLAY
key is pressed again, playback begins at
exactly the cue point.
While the auto function is on, the
A.CUE
indicator lights up
on the display.
Auto Cue function
This function allows the playing back a single track, and
the automatic cuing of the next track ready for playback.
Use the A_READY sub-menu option to turn the function
on or off. When on, the
A.READY
indicator lights up on the
display.
Combined with Auto Cue function, the unit enters play-
back ready mode at the point where the sound detection
level is set in A_CUE LEVEL sub-menu option of the next
track.
Auto Ready function